English

AeroLush C08 Manual

Safety Information

Please read these instructions carefully before using the device. Failure to follow these safety guidelines may result in injury, void the product warranty, and release Vivosun from all liability.

Do not operate the device with wet hands, submerge it in water, or place it near water or oil.
Do not pierce or burn the device.
Keep all ventilation openings clear of obstructions.
Do not use this product outdoors, in direct sunlight, or expose it to weather or the elements.
Follow local grid interconnection rules when installing the air conditioner and ensure proper grounding. If you have any questions about electrical installation, follow the manufacturer’s instructions or consult a professional electrician.
Never insert fingers or objects into the air outlet. Warn children about these dangers.
If the device emits a burning smell or shows signs of malfunction, immediately cut off the power supply and stop using it.
Do not disassemble, modify, repair, or clean internal components without authorization.
Keep hands away from the air outlet and internal components.
Do not place heavy objects on the air outlet or sit directly on it.
Do not replace the power cord without authorization, splice it, or use it in parallel with other high-power electrical devices.
Do not cover the product or power cords with rugs or other fabric materials.
Place the device on a flat, dry surface, maintaining at least 50 cm of clearance from surrounding objects or walls.
Do not place the product on a soft, elevated, or unstable surface where it may fall or have its air intakes or exhaust blocked.
Do not clean the air conditioner with chemical solvents such as gasoline or alcohol. Before cleaning, disconnect the power supply and use a slightly damp soft cloth. For heavy dirt, use a mild detergent.
This device may be used by children aged 8 and above, as well as individuals with reduced physical, sensory, or mental capabilities, or those lacking experience and knowledge, provided they have received proper supervision or instruction on its safe use and understand the associated hazards. Children must not play with the device.

1f37ba1bfbc8bddb443a6bbdf26fffed

Risk of fire or explosion—this device contains a flammable refrigerant. Follow all additional safety precautions to prevent hazards.

Do not use any methods to accelerate the defrosting process or for cleaning other than those recommended by the manufacturer.
The device must be stored in a room without continuously operating ignition sources, such as open flames, gas appliances, or electric heaters.
Do not pierce or burn refrigerant tubing. Be aware that refrigerants may be odorless. Keep ventilation openings clear of obstruction.
Do not drill holes in the unit.
Maintenance, cleaning, and servicing should only be performed by technicians who are properly trained and qualified in handling flammable refrigerants.
Dispose of the air conditioner in accordance with federal and local regulations. Flammable refrigerants require special disposal procedures.

Key Features

beb274bcccd8258185f1e2074fd7a061

Designed for Growing

Effortless installation—quickly connect the air conditioner to your grow space.

0cdb290820df378a9fd651dbaa165feb

4-in-1 Mode

4-in-1 Mode: Cool, Heat, Dry, Fan. Create the ideal environment for your grow space.

4e93ab5e64a3f74663aee9acbc80a1a3

Precise Sensor

External temperature and humidity probes can be connected for precise, targeted environmental readings.

0e11d4f5a86a181b5d0430338fcd692d

Convenient Operation

Connect to the Vivosun app for remote control of the device, in addition to using the local operation panel.

Product Contents

Image	Name	Quantity
	C08	1 PC
	Evaporator Air Inlet Hood	1 PC
	Evaporator Air Outlet Hood	1 PC
	Temperature and Humidity Probe	1 PC
	Exhaust Duct 2m(with adapter)	2 PCS
	Exhaust Duct	2 m
	Filter	1 PC
	Condenser Outlet Adapter	1 PC
	Window Duct Adapter	1 PC
	Window Sealing Plate Assembly (Long)	1 PC
	Window Sealing Plate Assembly (Short)	1 PC
	Drain Pipe	1 PC

Image

Name

Quantity

C08

1 PC

Evaporator Air Inlet Hood

1 PC

Evaporator Air Outlet Hood

1 PC

Temperature and Humidity Probe

1 PC

Exhaust Duct 2m(with adapter)

2 PCS

Exhaust Duct

2 m

Filter

1 PC

Condenser Outlet Adapter

1 PC

Window Duct Adapter

1 PC

Window Sealing Plate Assembly (Long)

1 PC

Window Sealing Plate Assembly (Short)

1 PC

Drain Pipe

1 PC

Dimensions

Size

13.1*12.9*27.2 inch

Net Weight

44 lbs

Cooling Capacity

8000 BTU

Dehumidifying Capacity

45 pints/day

Power Supply

120 V/60 Hz

Rated Input

840 W

EER/CEER

6.5

Refrigerant

R32

Installation

1	Evaporator Air Outlet	4	Spare Drainage Hole
2	Evaporator Air Inlet	5	Condenser Air Outlet
3	Drainage Hole	6	Condenser Air Inlet

Installation of Accessories

STEP 1.1

Insert the evaporator air outlet hood into the air conditioner’s evaporator air outlet, ensuring the correct top and bottom orientation of the hood.

STEP 1.2

Insert the condenser connector horizontally into the condenser air outlet.

STEP 2.1

Take one piece of exhaust duct (2m with adapter) and connect it to the evaporator air outlet hood, then tighten it counterclockwise.

STEP 2.2

Take the other piece of exhaust duct (2m with adapter) and connect it to the evaporator air inlet hood, then tighten it counterclockwise.

STEP 2.3

Take one exhaust duct, pull out a portion from the duct’s end, and then screw it clockwise into the condenser outlet adapter.

STEP 3

Ensure that the adapter, hoods, and ducts are securely installed and properly fitted in place.

Installation of Probe

STEP 1

Insert the temperature and humidity probe into the 2.5mm jack on the right side of the evaporator air inlet hood, ensuring it is securely in place.

Note: If the probe is not connected, the screen will display “–”.

STEP 2

Place the probe in the target area and secure it.

Note: It is recommended to position the sensor at a height of 2 to 4 inches above the canop

Configuration of Duct Configuration

A.Cool Mode & Dry Mode

*1. Evaporator Air Inlet
 2. Evaporator Air Outlet

B.Heat Mode

*3. Condenser Air Outlet

Note: When using heat mode, it is essential to switch the duct connection.

C.Fan Mode

In Fan Mode, there are no specific connection requirements. You may refer to other modes or install the duct as needed based on your setup.

Note:

1.Ensure the exhaust duct does not have bends greater than 45°, as this can affect the air conditioner’s performance.

2.The exhaust duct inside the tent should be positioned upwards, avoiding direct airflow onto the leaves.

3.Temperature and humidity layering may occur inside the tent. If the plants are growing tall, consider adjusting the positions of the air outlet and intake pipes to optimize conditions for the canopy.

73aea2aed690b2308356406d2ba50194

37772cfaecb253d944a2633d1df62d2b

*Ⅰ  :Cool Mode
 Ⅱ  :Heat Mode

4.If indoor humidity is too high, condensation may form on the evaporator exhaust duct, causing water droplets. Wrapping the exhaust pipe with insulation material can help reduce condensation.

Installation of Drainage Pipe

Step 1

Unscrew the nut on the drainage hole counterclockwise, then remove the soft plug inside.

Step 2

Remove the drainage connector from the water pipe and insert it into the nut, then screw the nut back onto the drainage hole clockwise.

Step 3

Attach the drainage pipe to the drainage connector and place the other end in the sewer or drainage tray.

Note:

The drainage pipe must be connected in Dry Mode; for other modes, it is optional.
If the screen displays a “water full” icon, unscrew the spare drainage hole to drain the water.

Installation of Window

Step 1

Install the Window Duct Adapter clockwise onto the other end of the condenser exhaust pipe.

Step 2.1

Partially open the window and mount the window sealing plate assembly onto the window. The components can be placed either horizontally or vertically.

Step 2.2

Extend the various components of the window sealing plate assembly, adjusting their distance to ensure both ends of the assembly make contact with the window frame. Then, secure all components in place.

Note:

Select the appropriate window sealing plate (long or short) based on your window size.
The flat end of the exhaust pipe joints must be securely snapped into place.
The pipe should not be distorted or have substantial bends (greater than 45°). Ensure that the exhaust pipe remains unobstructed for proper ventilation.

Control Panel

3ae8ceadad3c1c308f3c1bd0ec2e927f

On/Off Button

Press to turn on.

Press and hold for 3 s to turn off.

6ffe4b09ea984fc7c9e8c945198637a0

Mode Button

Press to switch function modes:Cool, Heat, Dry, Fan.

Press and hold to exit Recipe Mode (Effective only when recipe is running).

8fed3c6374c70a6744c492aa5b097778

Fan Speed Button

Press to switch fan modes: standard mode and quiet mode.

ce97f392652be3c25e7a78ecc1ca8008

Up Button

Press to increase value of current setting.

Press and hold to switch between °C and °F

57274b1396b7354d0830472b5f2a2de6

Down Button

Press to decrease value of current setting.

fe08ac2ead80e6a4a500a3a601d13895

Confirm Button

Press to confirm current operation.

Press and hold to enter the settings menu, including calibration, and mute toggle.

Other Button Operations:

Press and hold the On/Off and Up buttons to lock or unlock the device.
Press and hold the On/Off and Confirm buttons to reset the device to factory settings.

ec0f19d3a260f9f7d727ae652d618c1a

Function Mode

Cool, Heat, Dry, Fan.

50811f26860d0f47673ab2b12ec59669

Status Icon

Indicates device status, including cloud lock, tilt, water full, probe detection, connection status, and mute.

ad1fb8c7a2bca66f009f215c0466bfcf

Probe Readings

Displays current probe readings, including temperature, relative humidity, and VPD.

e9fb987813a442985228f4ea9d77c94d

Fan Speed

Standard Mode and Quiet Mode.

016414a34d61ea747b8189df500d580d

Error Icon

Displays an error code when the device encounters an issue.

3e42b9543e2dc2b2b8a45e946666e96b

Screen lock Icon

Illuminates when screen operation is locked.

6804610b9f53db11bd7f716e37399512

Calibration Mode

Icon appears when performing temperature and humidity calibration.

4f253736efd5511a1248d59a23514f07

Setting Mode

Icon appears when adjusting temperature and humidity settings.

Operation

Press the Mode Button to enter mode selection, then press it again to cycle through available modes. Select Cool Mode and press the Confirm Button to confirm. Use the Up/Down Button to set the target temperature, then press the Confirm Button again to start the device.

Note:

After switching modes, ensure that the duct installation is correct.
In Fan Mode, temperature and humidity settings are not required.
The air conditioner uses a smart buffer to stay within ±1.8°F of your set temperature and ±5% of your target humidity.

Wi-Fi Configuration

Step 1

Download the Vivosun app

Search “VIVOSUN” in the Apple App Store or in the Google Play Store to download the Vivosun app.

Step 2

Add AeroLush

Tap “+” to add AeroLush, then follow the prompts in the app to complete the Wi-Fi configuration.

Step 3

Name Device

After a successful connection, you can rename your device.

Maintenance

Before performing maintenance, make sure to turn off the power and unplug the device.

Surface Clean

Wipe the surface with a soft cloth. Do not use aggressive chemicals or detergents to clean the surface, as they may cause damage.

Filter Clean

Take the filter out of the air conditioner. Gently soak the filter in a mild detergent, rinse it thoroughly, and allow it to dry. Dirty filters reduce airflow, so they should be cleaned every two weeks.

Troubleshooting

Problems

Reasons

Solutions

The air conditioner does not work.

There is no electricity.

Turn it on after connecting it to a powered socket.

The ambient temperature is too low or too high.

It is recommended to use the device at a temperature of 7-35°C (44-95°F).

The environmental target value has been reached.

Adjust the set temperature or humidity.

The compressor must wait for 3 minutes after stopping before it can restart (system protection).

Wait for 3 minutes and check if it works.

The water tank is full in dry mode.

Drain the condensed water and connect the drainage pipe.

Temperature and humidity probe not detected.

Reinsert or replace the temperature and humidity probe.

The air conditioner tipped over.

Lay the device flat and let sit for at least 24 hours before use.

Product displays error code:

DF: Defrosting in progress

E01: Power board communication failure

E02: NTC sensor short circuit

E04: NTC sensor open circuit

Wait for 5 minutes to see if the issue resolves. If not, please contact our customer service for assistance.

Cooling capacity is not sufficient.

The air inlet and outlet are blocked.

Clear the blockage.

The exhaust duct is severely bent.

Ensure that the duct bend does not exceed 45°.

The filter is too dirty.

Clean or replace the filter.

The fan speed is too low.

Switch to standard mode.

Noise or vibration.

The air conditioner is not placed on a flat surface.

Put the air conditioner on a hard, flat surface.

Warranty

Vivosun provides a one-year warranty against defects on the AeroLush Air Conditioner purchased directly from us or through our authorized dealers. This warranty reflects our commitment to addressing any manufacturing defects or premature breakage that may occur during normal use of our products.

Our warranty covers the replacement or refund of purchases that exhibit material defects within one year of the original purchase date. To initiate a claim, customers must contact us and provide proof of purchase to verify eligibility.

This policy does not cover products that have been misused, abused, or intentionally damaged. It also excludes normal wear and tear or cosmetic defects, such as minor scratches.

Customers can feel confident knowing our products undergo rigorous quality testing. This one-year warranty demonstrates our belief in the durability of our products under normal use.