English

AeroFluxW70 Manual

Safety Information

Please read the following instructions carefully before using this device. Failure to follow these safety guidelines may result in injury and will release Vivosun from all liability and void all product warranties.

Always unplug the heater when not in use.
Do not operate the heater if the cord or plug is damaged, or if the heater malfunctions, has been dropped, or damaged in any way. A damaged cord must be replaced by a qualified professional to avoid hazards.
Always plug the heater directly into a wall outlet. Never use an extension cord or power strip.
Do not run the power cord under carpeting, rugs, runners, furniture, or appliances. Keep the power cord away from high-traffic areas to prevent tripping.
To disconnect the heater, turn the device off, then remove the plug from the outlet.
Do not place the heater immediately below a wall outlet.
This heater has a polarized plug (one blade is wider than the other) to reduce the risk of electric shock. The plug fits into a polarized outlet only one way. If it does not fit fully, reverse the plug. If it still does not fit, contact a qualified electrician. Do not tamper with this safety feature.
Use the heater only on a horizontal, stable surface.
This heater is not intended for use in bathrooms, laundry areas, showers, swimming pools, or similar indoor locations. Never place the heater where it could fall into a bathtub or other water container.
Do not insert or allow foreign objects to enter any ventilation or exhaust openings, as this may cause electric shock, fire, or damage to the heater.
To prevent fire hazards, do not block air intakes or exhaust openings. Avoid using the heater on soft surfaces such as beds, where airflow may be obstructed.
This heater contains hot, arcing, or sparking parts internally. Do not use it in areas where gasoline, paint, or other flammable liquids are stored or used.
Use this heater only as described in this manual. Any use not recommended by the manufacturer may cause fire, electric shock, or injury.
Exercise extreme caution when the heater is used near children, the elderly, or individuals with reduced physical, sensory, or mental capabilities, especially when unattended.
This heater is not intended for use by persons (including children) with reduced abilities unless supervised or instructed by a responsible person.
Children should be supervised to prevent them from playing with the heater.
The heater’s surfaces become hot during operation. To avoid burns, do not touch bare skin to hot surfaces. Use provided handles when moving the heater.
Keep textiles, curtains, and other flammable materials at least 1 meter away from the air outlet to reduce fire risk.
WARNING: Do not use this heater in small rooms occupied by persons unable to leave without assistance unless constant supervision is provided.
Before installation, operation, or maintenance, inspect the heater visually and read all caution labels thoroughly. Failure to follow these instructions may result in fire, electric shock, or serious injury.
SAVE THESE INSTRUCTIONS

Product Contents

8d602401b052e5df29412dd4862e4f6c

W70 Heater

1 PC

3e260dfe62df6bbd8c1d51d1b22e755e

Temperature & Humidity Sensor

1 PC

f41c1d67d97eefc40f673de8dc9354b1

Air Outlet

1 PC

b586c0d499d0f4ab0406d5c1054db96f

Extension Hose

1 PC

Specifications

Model

VSE-ATW70

Control Modes

VPD, Temp

Power

700W

Range

5 Levels

Wi-Fi Connection

2.4 GHz

Input

120 V AC 50/60 Hz Max 5.84 A

(220–240 V AC 50/60 Hz Max 3.9 A)

Dimensions

9.45" L × 9.45" H × 4.72" W

(24L × 24H × 12W cm)

Grow Space

Up to 60'' × 60'' × 80''

(150 × 150 × 200 cm)

Operating Temperature Range

32—95°F (0—35°C)

Operating Humidity Range

35%—85% RH

Installation

Step 1

Install the air outlet and attach the extension hose if necessary. Place the air outlet at the bottom of the grow tent, ensuring it does not face the plants directly.

Step 2

Connect the temperature and humidity probe to the 2.5 mm jack near the switch. Position the probe close to the plants in the target area and secure it firmly.

Step 3

Plug in the power cord and switch the device on.

Operation

For maximum convenience, we recommend connecting your AeroFlux smart heater W70 to the Vivosun app. This lets you monitor and control your grow environment from anywhere using your smartphone—whether you’re relaxing at home or traveling abroad. The app also unlocks additional features and functions to enhance your growing experience.

CONNECTING TO THE VIVOSUN APP

1. Download the Vivosun app

Search"VIVOSUN" in the Apple App Store or in the Google Play Store to download the Vivosun app

2. Add your AeroFlux smart heater W70

Tap"+”or 1506d47adfcfaa94f9e2f4edd2292d5f to add your AeroFlux smart heater W70. When connecting to the Vivosun app, 974a1173a8435ab238c3fec77ccdb3ff will show on the screen.

Note: Make sure you have a 2.4GHz Wi-Fi connection, and that Bluetooth is enabled on your phone.

Operation

Power 2cc0fa77b5ee3d2c0ee4182283816ec7

Turn On

Turn Off

Confirm 94ba2a90cf02fdd267e02e21c8442c1c

Confirm Selection

Stop Current Recipe /Edit Target Temp.

Up d8bea4197f83eea74e3685b8fced4bef

Increase Temperature Value

Toggle °F/°C

Down 3ec3e10645d0afb2960d6e80e4f1e023

Decrease Temperature Value

Toggle Touch Sound On/Off

2cc0fa77b5ee3d2c0ee4182283816ec7 + d8bea4197f83eea74e3685b8fced4bef

----

Lock/Unlock

2cc0fa77b5ee3d2c0ee4182283816ec7 + 94ba2a90cf02fdd267e02e21c8442c1c

----

Restore Factory Settings

Error code

Description

Heater Overturned

Overheating

The heater will stop operating, and then the error code will flash.

Local Mode Operation

Local settings only support temperature mode:

Short-press the Power button to turn on the heater.
When the temperature value flashes, use the Up/Down buttons to select your target temperature, then press Confirm to set it.
Next, when the output level bar flashes, use the Up/Down buttons to select the maximum output level, then press Confirm to save the setting.
To edit the target temperature and output level later, long-press the Confirm button and repeat steps 2 and 3.

Vivosun App Operation

Add the heater to the Vivosun app as a new device.
Temperature mode: Select temperature mode, set the target temperature, then tap “Turn On”.
VPD mode (only supported via the app): Select VPD mode, set the min. and max temperature, and target VPD value, then tap “Turn On”.

Recommendation: Use the app’s recipe function to configure day/night temperature and VPD profiles. This ensures tailored environmental control, enhancing growth outcomes while improving energy efficiency.

Recommended Settings for Different Plant Growth Stages

Stage

Temperature Mode

VPD Mode

Day Time (Light On) Temperature Target

Night Time (Light Off) Temperature Target

Light On VPD Target, Temperature Range

Light Off VPD Target, Temperature Range

Germination

75°F (24°C)

0.5kPa

72°F-82°F (22°C-28°C)

0.5kPa

72°F-82°F (22°C-28°C)

Seedling

73°F (23°C)

68°F (20°C)

0.6kPa

70°F-79°F (21°C-26°C)

0.5kPa

64°F-75°F(18°C-24°C)

Vegetative

73°F (23°C)

68°F (20°C)

1.0kPa

70°F-79°F (21°C-26°C)

0.5kPa

65°F-75°F(18°C-24°C)

Flowering

70°F (21°C)

64°F (18°C)

1.2kPa

66°F-79°F(19°C-26°C)

1.0kPa

61°F-75°F(16°C-24°C)

Warranty

Vivosun offers a two-year warranty on the AeroFlux smart heater W70 purchased directly from us or through our authorized dealers. This warranty reflects our commitment to addressing any manufacturing defects or premature failures that may occur under normal use.

The warranty covers replacement or refund for products that exhibit material defects within two years of the original purchase date. To initiate a claim, customers must provide proof of purchase to verify eligibility.

Please note that this warranty does not cover products that have been misused, abused, or intentionally damaged. It also excludes normal wear and tear or cosmetic imperfections such as minor scratches.

Our products undergo strict quality control and testing, and this warranty is a testament to our confidence in their durability and performance.

FCC statement

NOTE:This heater has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This heater generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with greater than 20 cm between the radiator and your body.

IC Statement

CAN ICES (B) / NMB (B)

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

The product complies with IC radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body

We help you grow your best green.

We provide the highest quality.

We relentlessly pursue the future.

We make growing more enjoyable.

We support every grower.